Switch Product
MS Square
Square bars for pickets, balusters & fine detailing.
A slim, uniform galvanised square bar used wherever a grill or railing needs repeated vertical members. Every RealEdge Galva MS Square section goes through a factory galvanised steel process and is HD Shield treated for lasting galvanised steel corrosion resistance. It is a properly straightened steel section from end to end, so every picket in a run carries the same finish and profile. It is one of the galvanised mild steel sections fabricators reach for first as anti rust steel for balcony grills, gate pickets and window grill infill, and one of the reasons builders call it the best galvanised steel for grill fabrication in the range.
MS Square — full size range
All sizes are factory-galvanised with HD Shield anti-rust technology and shipped fins-free, properly straightened, with flat ends.
| # | Size | mm (Side) |
|---|---|---|
| 01 | 08 | mm (Side) |
| 02 | 10 | mm (Side) |
| 03 | 12 | mm (Side) |
| 04 | 16 | mm (Side) |
Built for how fabricators actually use it
The 8 mm and 10 mm galvanised square bar sizes suit decorative infill work, fine scrollwork and lighter picket detailing where the section is being bent, twisted or welded into patterns rather than carrying significant load. The 12 mm and 16 mm sizes are the standard choice for structural balusters, balcony spindles and gate infill verticals where the square bar needs to resist lateral force across its full span between welds.
For projects using multiple galvanised Galva profiles — flat bar borders, angle frame corners and square bar infill — ordering the full set from a single RealEdge Galva dealer ensures consistent zinc coat thickness across every section in the assembly. Contact your nearest dealer or call +91 91472 45942 for current galvanised square bar price and size availability.
Vertical Pickets & Balusters
The standard choice for a galvanised steel square bar for pickets and galvanised square bar for balusters in grills, gates and railings. Every HD Shield treated bar protects each picket and baluster along its full exposed length — exactly the kind of anti rust steel for balcony grills fabricators specify by brand.
Decorative Infill Patterns
Fills geometric and lattice patterns inside larger grill frames, popular as ms square bar for grill work, square bar for window grills, galvanised square bar for grills and square bar for decorative fabrication — with the factory zinc coat giving each piece a consistent silver finish.
Gate & Fence Detailing
Adds fine structural detailing to gates and boundary fencing as a common galvanised steel section for fence detailing and square bar for gate design. Built with rust resistant gate frame material as galvanised square bar for gate pickets, it suits both a galvanised gate design and a corrosion resistant gate design.
Balcony Spindle Work
Used for galvanised steel for spindle work balcony where a slim, uniform profile is needed, and for square bar for railing fabrication generally, as balcony grill fabrication material and anti rust balcony railing material — where outdoor exposure means the factory HD Shield protection is doing real work.
Every advantage comes off the production line
The same HD Shield process and factory finish applies across the full Galva range — here's what it means for MS Square specifically.
Factory-Finished Galvanised Steel
Every bar goes through hot dip galvanising corrosion protection at the mill before it reaches a dealer — not an anti rust paint applied on site. The full length of every square bar carries a zinc bond before it reaches the fabrication workshop.
HD Anti-Rust Shield
A zinc coating forms a barrier the steel does not get without it — which is why galvanising vs primer coating and anti rust paint vs galvanising comparisons both favour the zinc coated steel square bar over time. The HD Shield layer provides both barrier and sacrificial protection for outdoor pickets, balusters and grills.
Uniform Thickness
Consistent thickness across every bar keeps pickets and balusters aligned without packing or shimming, useful for steel sections for commercial fabrication as well as home projects. All four faces measure the same from end to end.
Smooth Edges & Fins Free
Edges are finished smooth for cleaner handling and a better weld line on site, shipped without fins so fabricators can go straight to cutting and bending without grinding or edge-dressing.
Defect Free
Every section is inspected for surface defects before it leaves the mill, part of the quality tested steel sections you are buying — not just the coating. Defect-free manufacturing means reliable performance across every bar in a consignment.
Superb Silver Shine Finish
The silver shine finish is what separates factory galvanised steel from a section that has just been painted, and part of why MS Square remains one of the most requested galvanised upgrades among fabricators who specify the section by brand rather than accepting generic stock.
Five sections, one finish standard
Explore the rest of the RealEdge Galva product range.
Chat Karo, Baat Karo, Mulaqat Karo.
Visit your nearest dealer and see the MS Square silver shine in hand.
