What Is MS Flat? Types, Sizes, Uses & Applications

Walk into any fabrication workshop in India and you will see MS flat stacked against the wall. It is used for gates, window grills, railings, frames and brackets, and it is one of the most bought steel sections in the country. Yet many buyers still ask the same basic questions. What exactly is MS flat? Which size should I pick? How much does it weigh?

What Is MS Flat? Types, Sizes, Uses & Applications

This guide answers all of them in simple terms, using the actual SRMB RealEdge MS flat range, so you can pick the right size for your work with confidence.

What Is MS Flat?

MS flat stands for Mild Steel Flat, a long, rectangular steel section with a flat cross section and uniform thickness. It is also called MS flat bar, mild steel flat bar or MS flat steel. It is described by its width and thickness in millimeters, for example 40 x 6 mm, where 40 is the width and 6 is the thickness.

Because it is simple in shape and easy to cut, bend and weld, MS flat is the first choice of grill and gate fabricators.

Key Features of a Good MS Flat

A good MS flat should be easy to work with and reliable in the finished product. The RealEdge MS flat range is built around these qualities:

  • BIS certified and precise in quality
  • Superb finish with smooth edges
  • Fins free and defect free
  • Properly straightened, with flat ends
  • Uniform thickness along the full length
  • Greater malleability for decorative and better designs
  • Cost efficient for the grill fabricator

Each of these features saves the fabricator time. Fins free edges need less grinding. Straight bars fit frames neatly. Uniform thickness keeps every joint clean.

RealEdge MS Flat Sizes and Weight Chart

SRMB RealEdge offers MS flat in 12 standard sizes, covering light window grill work to heavier gate frames. The chart below shows each MS flat size in mm, with theoretical weight per meter and per 6 meter length, the standard length of RealEdge sections.

MS Flat Size (mm)Weight per Meter (kg)Weight per 6 m Length (kg)
18.5 x 5.50.804.79
20 x 50.794.71
20 x 60.945.65
25 x 50.985.89
25 x 61.187.07
25 x 122.3614.13
32 x 51.267.54
40 x 51.579.42
40 x 61.8811.30
40 x 123.7722.61
50 x 83.1418.84
65 x 63.0618.37

These are theoretical weights calculated from standard steel density. Actual weight can vary slightly with rolling tolerance.

Understanding MS Flat Dimensions

Three dimensions define every MS flat:

  1. MS flat width. The wider side of the section. RealEdge widths run from 18.5 mm up to 65 mm.
  2. MS flat thickness. The narrower side. RealEdge thicknesses run from 5 mm to 12 mm.
  3. MS flat length. The length of each bar. RealEdge MS flat comes in a standard length of 6 meters.

Always read width and thickness together. A 25 x 5 mm bar and a 25 x 12 mm bar share the same width, but the second is more than twice as heavy and far stiffer.

How to Calculate MS Flat Weight

The formula is simple:

Weight Formula

Weight (kg/m) = 0.00785 x Width (mm) x Thickness (mm)

For example, a 40 x 6 mm MS flat weighs 0.00785 x 40 x 6 = 1.88 kg per meter. Multiply by the length to get total weight. A 6 meter bar weighs about 11.30 kg. This helps you plan cost, transport and handling before ordering.

Types of MS Flat

MS flat can be grouped in a few useful ways.

By thickness class

  • Light MS flat (5 to 6 mm thick): 18.5 x 5.5, 20 x 5, 20 x 6, 25 x 5, 25 x 6, 32 x 5, 40 x 5, 40 x 6 and 65 x 6 mm. Ideal for window grills, light gates and decorative work.
  • Heavy MS flat (8 to 12 mm thick): 25 x 12, 40 x 12 and 50 x 8 mm. Used for gate frames, structural supports and load bearing work.

By manufacturing method

  • Hot rolled MS flat. Shaped at high temperature, giving good malleability for bending and decorative designs.

By standard and certification

  • BIS certified MS flat. Made and tested to Indian standards. RealEdge MS Flats (ISF) conform to IS 1730:1989, and the structural sections also conform to IS 2062:2011 for weld convenient fabrication.

How RealEdge MS Flat Is Made

The quality of an MS flat starts long before the bar reaches your workshop.

Captive billet. RealEdge MS flat is rolled from SRMB’s own captive billet, cast from superior quality ore sourced material and tested for carbon, sulphur and phosphorus. This keeps chemistry consistent from batch to batch.

Automated block mill. SRMB is a pioneer in 100 percent automated block mills with tungsten carbide rollers in grill sections. The result is perfect shape, uniform thickness, equal standard length of 6 meters and consistent section weight.

Walking type cooling bed. Hot bars cool evenly on an automated cooling bed, without manual handling, so they stay properly straightened and free from defects.

Quality control. Advanced European technology, a strict quality management system and NABL accredited labs support batch to batch consistency and high precision.

Uses and Applications of MS Flat

  • Gates: frames, cross braces and decorative patterns
  • Window grills: frames and bars for safety and design
  • Fabrication: brackets, supports, ladders and machine bases
  • Railings and staircases: rails, frames and supports
  • Furniture and shelving: frames, legs and racks
  • Structural support: light bracing and connecting members

The RealEdge range is made with grill fabrication in mind, under the promise of “Steel for Grill,” so it suits these applications especially well.

How to Choose the Right MS Flat Size

Use this simple guide:

ApplicationSuggested Direction
Window grill bars and decorative workLighter sizes such as 20 x 5, 25 x 5 or 25 x 6 mm
Light gates and grill framesMid sizes such as 32 x 5, 40 x 5 or 40 x 6 mm
Heavy gate frames and load bearing workThicker sizes such as 25 x 12, 40 x 12 or 50 x 8 mm
Wide frames and bracketsWider sizes such as 65 x 6 mm

Consider the span, the load and the finished design. When in doubt, check with an experienced fabricator or your supplier.

Quality Checks Before You Buy MS Flat

  • Straightness, by sighting along the length
  • Uniform thickness and width at several points
  • Smooth edges with no fins or burrs
  • A clean surface without cracks or heavy scale
  • Consistent weight compared with the chart above

MS Flat vs MS Square

MS flat has a rectangular cross section and bends easily into curves. MS square has equal sides and is preferred for vertical infill bars. Many gates and grills use both, with flat for the frame and scrolls, and square for the bars. SRMB RealEdge MS Square is available in 8, 10, 12 and 16 mm.

Frequently Asked Questions

What does MS flat stand for?

MS flat stands for Mild Steel Flat, a rectangular steel section with uniform thickness, also called MS flat bar.

What are the standard MS flat sizes?

RealEdge offers 18.5 x 5.5, 20 x 5, 20 x 6, 25 x 5, 25 x 6, 25 x 12, 32 x 5, 40 x 5, 40 x 6, 40 x 12, 50 x 8 and 65 x 6 mm.

How do I calculate MS flat weight?

Use 0.00785 x width in mm x thickness in mm to get weight per meter, then multiply by length.

What is the standard length of MS flat?

RealEdge MS flat comes in a standard length of 6 meters.

What is MS flat used for?

It is used for gates, window grills, railings, brackets, ladders and general fabrication.

What is MS grade steel?

MS, or mild steel, is a low carbon steel known for good weldability and moderate strength, widely used in fabrication and construction.

What is the difference between MS flat and MS square?

MS flat is rectangular and easy to bend into curves, while MS square has equal sides and is used for straight infill bars.

Is RealEdge MS flat BIS certified?

Yes. RealEdge MS flat is BIS certified and conforms to IS 1730:1989 for MS Flats, with structural sections conforming to IS 2062:2011.

Choose MS Flat Made for Grill Fabricators

Choosing the right MS flat comes down to size, quality and consistency. When the bar is straight, uniform and fins free, every gate, grill and frame comes out cleaner and lasts longer.

SRMB RealEdge makes MS flat from captive billets in an automated block mill, cooled on a walking type cooling bed and tested in NABL accredited labs. It is steel built for beautiful grills, in 12 sizes to match your design. To choose the right size for your next project, visit or contact SRMB RealEdge, MS flat bar supplier in Kolkata, today.

👤

Rajesh Kumar Sharma

Senior Design & Fabrication Consultant, SRMB RealEdge

Rajesh brings over 18 years of experience in structural steel design and fabrication consulting. He has worked with more than 500 fabricators across East India and authored over 40 technical guides on material selection, corrosion protection, and best practices for steel construction.

Choose the Right MS Flat Size for Your Project

Steel built for beautiful grills, in 12 sizes to match your design. Contact SRMB RealEdge today.

Related Articles

Chat Karo, Baat Karo, Mulakaat Karo — chat with us on WhatsApp